Choosing a tractor.

sleuth

Lovin' The Homestead
Joined
Jan 7, 2013
Messages
130
Reaction score
3
Points
50
Location
rural Ohio
I'm getting a nice tax check this year and am going to take the plunge and buy a tractor. Budget is $3K but hope to keep it less than $2500.

I'm needing an auger and grader to start, and I'd like to get an endloader or excavator in the near future. Would prefer a live PTO, power steering, and a wide front wheel base. Based on another thread I know I should look at a Ford 8N ahead of a 2N or 9N. Plan is to use it for digging post holes, maintaining the driveway, gardening use, brush-hogging & mowing, and potentially planting/harvesting 10 acres.

Here's what's available in the neighborhood. I've never bought a tractor before and would love to hear everyone's thoughts on these and compare/contrast with one another.

1. Ford 8N
2. Ford Jubilee
3. Ford 801 Powermaster
4. Ford Workmaster
5. Ford 640
6. Ford 850
7. Farmall 140
8. Farmall Super A
9. Allis Chalmers D15 Series II
10. Allis Chalmers B
11. Power King 2418
12. International Harvester 184
13. 1950 Massey Ferguson T020
14. 1965 Massey Ferguson - not sure of the model.
15. 1964 John Deere 1010
16. Long 360
17. Satoh S650G
18. Iseki TS 1910
19. Iseki TS 1610

Also, thoughts on the following?
1. Gas vs. Diesel
2. 6V vs. 12V
3. Minimum Horsepower to do the above tasks.

Thanks in advance everyone!
 

HEChicken

Power Conserver
Joined
Jan 25, 2011
Messages
98
Reaction score
1
Points
34
:caf I will also be very interested in the answers - I'm not quite at purchase point but in the future will likely need to get one.
 

unclejoe

Almost Self-Reliant
Joined
Sep 12, 2008
Messages
276
Reaction score
11
Points
102
Location
Pa
Can't go wrong with the Ford N's. They're built to last for many generations. The 4cyl flathead motor is not the most powerful at about 20hp but it will do all the tasks you mentioned. Around here they're cheap and plentiful. You can usually get one for $1500-$2500 depending on condition. I have a '44 2N that I just fixed up last year
P1010550.JPG
.
 

k15n1

Almost Self-Reliant
Joined
Nov 28, 2010
Messages
971
Reaction score
22
Points
115
The 8N doesn't have a live PTO. I don't think the hydraulics don't run when the tractor is stationary, which has obvious disadvantages.

If you want to maintain a gravel drive, you need a box blade. And you'll need a drag of some kind.

I have a Jubilee and that's been fine. Can't always find implements that I need. Not for cheap, at least. The plow was 400. Another 500 for a 5.5' double gang set of discs and I had to buy new...

Check the compression on all of the cylinders before you buy. Take a flashlight. See if the filters are clogged or if there are any other signs that it hasn't been maintained.
 

Terri P

Enjoys Recycling
Joined
Jul 31, 2011
Messages
3
Reaction score
1
Points
15
Where are you at on this?
I am not able to purchase anything this year (and maybe not next) but I need to start my research. I can't afford any mistakes.
 

Latest posts

Top