I haven't done any salsa yet. I just finished blanching the last of the bell peppers. They need to be frozen before I FD them. I did some checking in my notes and discovered I can save a full 6 hours of FD time on the peppers by freezing them first.
Salsa will be started tomorrow. My recipe uses 11 chilies, but the ones from my garden were all different sizes so I bought 11 from the market and weighed them to get a ballpark figure of how much per recipe. Then I will just weigh them and separate by batch before fire roasting and freezing. I'm not sure yet how many sauce pucks a batch of salsa will make, or how many I can fit on a tray, but after making 1 batch of salsa and freezing it I will have that info ready.
It's also time to change out the oil in the vacuum pump as well. There's always a small amount of water vapor that gets into the oil, and that needs to be filtered out regularly. There's a very expensive filter you can buy that is especially made for this, but I discovered a cheap alternate: I bought a Britta water filter and discarded the filter. Buy a roll of plain white toilet paper and cut it down to the core with a serrated knife (brush away all the crumbs) and make a roll that will just barely fit into the water filter. This has done a marvelous job so far of cleaning the oil- better than the commercial one in fact. I read that I don't need to change it until both top and bottom are black with gunk, which hasn't happened yet.
The other thing I have to do tomorrow is to seal up the already FD'd peppers in mylar bags with oxygen absorbers for long term storage. Right now I have 4 gallon sized ziplocs full. I can keep some in a glass jar for easy access, but most of them will go into the mylar. I found these online
http://mylarbagsdirect.com/8x10v.html that you can use in a vacuum sealer. Most mylar bags won't work in a vacuum sealer because they are smooth-textured so the air can't be vacuumed out; these have the little channels that vacuum bags have.
Time to go put those peppers in the freezer!